Tag: automotive education

I gave away my Mustang and you helped. Well, some of you helped. Those of you that follow me on social media that is. I cover the story in detail in the video. Zachary Kelley…

Those of you that have followed the #ETCGdadsTruck build know that I had some difficulties just after breaking in the freshly rebuilt engine. Aside from the pinging, there seemed to be excessive blow by causing…

This video shows you how to replace the thermostat and gasket on a Honda J Series V6 engine. The J Series V6 has been in Hondas since 1999. If you have a Honda with a…

This is (Episode 29) of the #ETCGDadsTruck Series. Link to (Episode 30): https://youtu.be/u0mBrFVET5Q Link to (Episode 28): https://youtu.be/H-PNL-x1dUs Yep, #ETCGDadsTruck starts up for the first time in this video. Also, some special guests stop by…

This is (Episode 21) of the #ETCGDadsTruck Series. Link to (Episode 22): https://youtu.be/PY-6otgWCC0 Link to (Episode 20): https://youtu.be/i5Zy04iBvzI Extended (Full) Version of this video: https://www.ericthecarguy.com/exclusive-videos/73-exclusive-videos/2405-how-to-build-install-a-custom-gauge-cluster-full-extended-version Sorry this video is so long, but I wanted to…

**Sponsored Video** When this video was shot dad and I were driving the Power Tour 2019. He had put about 500 miles on the truck, the first 500 miles since I put it together. Since…

I decided to go with the Edelbrock Pro Flo 4 System for my #ETCGDadsTruck engine. I liked that it was a ‘complete system in a box’ that I could adjust from the drivers seat via…

In this video I summarize the work that I did to my $200 Acura TL to make it roadworthy. I also share how much those repairs cost. You might be surprised by the result. This…

I’ve partnered up with Craftsman tools for this awesome giveaway! http://bit.ly/2W1SE3T **Sponsored Video** Stanley Black & Decker, Inc. and its affiliates are not the sponsor of this giveaway. The winners have been chosen! Congratulations to…

This is (Episode 17) of the #ETCGDadsTruck Series. Link to (Episode 18): https://youtu.be/I49YS-Nqn2U Link to (Episode 16): https://youtu.be/iZ2mxZmdfas Extended Version of this video: https://www.ericthecarguy.com/exclusive-videos/73-exclusive-videos/2396-engine-bay-and-interior-prep-etcgdadstruck-part-1-exclusive-video-extended-version There is a lot of electrical work in this part of…

This video is a complete step by step guide to replacing the timing belt and water pump on a Honda J series V6 engine found in many Honda vehicles including Accords, Odysseys, Ridgelines, Pilots, Acura…

This is (Episode 31) of the #ETCGDadsTruck Series. Link to (Episode 32): https://www.youtube.com/watch?v=RNzrdexY_Hw Link to (Episode 30): https://youtu.be/u0mBrFVET5Q Extended Version of this video available to Premium Members of my website: https://www.ericthecarguy.com/exclusive-videos/73-exclusive-videos/2442-dad-sees-the-truck-for-the-first-time-etcgdadstruck-extended-version-exclusive-video This is a video…

This video covers the entire process of replacing the rear struts on a 2004-2008 Acura TL. This procedure is also very similar to the 2003-2008 Honda Accord. This is Episode 2 in the Acura TL…

This is (Episode 25) of the #ETCGDadsTruck Series. Link to (Episode 26): https://youtu.be/rnKof4v0Zts Link to (Episode 24): https://youtu.be/g_dPAptfxnY This video covers the top end assembly of a small block Chevy for #ETCGDadsTruck. I also cover…

This is (Episode 20) of the #ETCGDadsTruck Series. Link to (Episode 21): https://youtu.be/rxT27VvkWfA Link to (Episode 19): https://youtu.be/fmgQ9GCwK7Q Extended (Full) Version of this video: https://www.ericthecarguy.com/exclusive-videos/73-exclusive-videos/2405-how-to-build-install-a-custom-gauge-cluster-full-extended-version If you’re looking to build a custom instrument cluster, this…

There are a few different methods you can use for tire repair. The method I show in this video is considered the ‘best possible tire repair’. This method is also known as the “Tire Plug/Patch…

This is (Episode 27) of the #ETCGDadsTruck Series. Link to (Episode 28): https://youtu.be/H-PNL-x1dUs Link to (Episode 26): https://youtu.be/rnKof4v0Zts In this episode I install the freshly rebuilt engine along with the new Monster Transmission in #ETCGDadsTruck….

After many years of waiting, I finally got an Integra Type R. Like many of the cars in my life, I didn’t plan for it, but I’m glad I ended up with it. See the…

This video covers the installation of roller lifters, roller rockers, and pushrods. It also covers how to align the rocker arms and set up pushrod guide plates. This work was done on a small block…

In this video I teamed up with Cap City Muffler to share with you their CAT Security™ system for my 2004 Honda Element. They have many other systems available for other vehicles that you can…

This procedure will work for all 7th generation Honda Civics. It should be an easy job, but if there’s rust, it might not be so easy as you’ll see in the video. I hope the…

I wanted to see if my lowered 1990 C1500 Chevy Truck could haul a car trailer. I quickly discovered that my suspension wasn’t up to the task. My solution was to install a set of…

In this episode of Fixing it Forward I start work on the 2005 Honda Odyssey. It gets a complete 4 wheel brake job along with a brake fluid change. I also replace the RF inner…

I recently picked up this D16Y7 as a replacement engine for my sons 1999 Honda Civic. When it arrived I looked it over to make sure everything was OK, but also to see what kind…

In this video I remove the engine and automatic transmission from the 2000 Honda Civic I picked up from Pull-A-Part a couple of weeks back. I’m hoping the transmission is still good. After removing the…

I recently purchased 2 Honda Elements. One of those Elements is going to my brother. I wanted to fix it up before I gave it to him and in this video I cover that work….

For me, using a pinion depth gauge is the best way to measure pinion depth and finding the perfect pinion shim. It’s way more accurate than going by gear tooth pattern and saves a bunch…